12V ULTIMATE SPEED® UOP 12 C1 Oil Pump

Technical overview
The 12V ULTIMATE SPEED® UOP 12 C1 Oil Pump is an electric transfer pump designed for extracting engine oil, diesel and heating oil in domestic use. It runs on 12V DC power and connects directly to a vehicle battery, making it suitable for occasional oil changes or the transfer of compatible fluids.

Key features
▸ Operates from a 12V vehicle battery
▸ Suitable for engine oil, diesel and heating oil
▸ Integrated on/off switch on the housing
▸ Suction hose and drain hose included
▸ Battery clamps with positive and negative polarity
▸ IPX4 protection rating
▸ Designed for non-continuous domestic use
▸ Compact housing with essential accessories included

How it works and what it is for
The 12V ULTIMATE SPEED® UOP 12 C1 Oil Pump draws fluid through the “IN” connection using the suction hose, then pumps it out through the “OUT” connection into a suitable container. It is mainly used for extracting engine oil during an oil change or for transferring diesel and heating oil, within the specified temperature and operating time limits.

Main technical specifications
▸ Model: UOP 12 C1
▸ Model number: HG03271
▸ Input voltage: 12V DC
▸ Input power: 60 W
▸ Maximum operating time: 30 min
▸ Maximum fluid temperature: 60 °C
▸ Protection class: III
▸ Protection rating: IPX4
▸ Flow rate for diesel / heating oil: approx. 1.5 l/min
▸ Flow rate for engine oil at 60 °C: approx. 0.2 l/min
▸ Delivery height: 0.7 m
▸ Maximum permissible pressure: 0.3 MPa / 3 bar
▸ Weight with accessories: approx. 890 g
▸ Sound pressure level: approx. 70 dB(A)

Included accessories / compatibility
▸ Oil pump with battery connection cable
▸ Transparent suction hose Ø 6 mm
▸ Grey drain hose Ø 12 mm
▸ 2 hose clamps
▸ Instructions for use
▸ Compatible with engine oil, diesel and heating oil
▸ Not suitable for petrol, kerosene, gearbox oil, water, chemicals, alkaline solutions, foodstuffs, paints or varnishes

Who it is recommended for
This model is recommended for private users who need a simple solution for suction-based oil changes or transferring compatible automotive fluids, powered directly from a 12V battery. It is best suited to occasional use and maintenance tasks that require a compact pump.

Pros and cons
Pros
▸ Practical 12V power supply from a vehicle battery
▸ Essential accessories included for suction and draining
▸ Suitable flow rate for diesel, heating oil and warm engine oil
▸ Compact format for occasional domestic use
Cons
▸ Not designed for continuous use beyond 30 minutes
▸ Incompatible with several common fluids such as petrol, water or gearbox oil

Battery / consumables advice
Always connect the red clamp to the positive terminal and the black clamp to the negative terminal of the 12V battery. Disconnect the device immediately after use to avoid excessive battery discharge. Use only suitable oil collection containers and do not mix different types of fluids.

Objective final opinion
The 12V ULTIMATE SPEED® UOP 12 C1 Oil Pump is a simple and practical technical solution for suction-based oil changes and the transfer of compatible fluids. Its performance is suitable for occasional domestic use, provided that the maximum temperature, operating time and fluid restrictions are respected.

FAQ
Can this pump be used to change engine oil?
Yes, it is designed to extract engine oil, with a flow rate of approx. 0.2 l/min when the oil temperature is up to 60 °C.

Can it pump petrol or water?
No, it must not be used with petrol, water, kerosene, chemicals, foodstuffs, paints or varnishes.

What power supply does it need?
It operates on a 12V DC supply using the clamps connected to a vehicle battery.