PARKSIDE® 21-Piece Dent Repair Kit

Technical overview
The PARKSIDE® 21-Piece Dent Repair Kit is a set designed for repairing small dents on car bodywork for private use. It combines a hot glue gun with a pulling system and tabs to apply targeted corrective force without more invasive work on the metal panel.

Key features
▸ Dent repair kit for small bodywork dents
▸ Hot glue gun included
▸ 7 pulling tabs in different sizes
▸ Suitable for use on motor vehicles
▸ Designed for DIY or home use
▸ Complete 21-piece set ready to use

How it works and what it is for
The PARKSIDE® 21-Piece Dent Repair Kit works by gluing the appropriate pulling tab onto the area that needs correction and then applying gradual pulling force with the repair bridge. This method is intended for small dents on vehicle body panels where the surface allows controlled and localised pulling.

Main technical specifications
▸ Product type: dent repair kit
▸ Glue gun model: WWS-HKP20-F02
▸ Kit model: WWS-DRS21-CFU1
▸ Power supply: 230 V~ / 50 Hz
▸ Rated power: 20 W
▸ Start-up power: 60 W
▸ Heating time: approx. 5 minutes
▸ Working temperature: approx. 150 °C
▸ Maximum temperature: 170 °C +/- 10 °C
▸ Protection class: II
▸ Intended use: dent repair on motor vehicles

Included accessories / compatibility
▸ 1 repair bridge with screw handle
▸ 7 pulling tabs
▸ 1 hot glue gun
▸ 10 hot glue sticks
▸ 1 empty spray bottle
▸ 1 glue remover
▸ 2 support pads
▸ 1 support bracket
Compatible with standard hot glue sticks with a diameter of 7 mm.

Who it is recommended for
This kit is suitable for drivers and DIY users who want to deal with small dents on car bodywork themselves without immediately turning to a workshop. It is better suited to occasional and simple repair work than to intensive or professional use.

Pros and cons
Pro
▸ Complete kit with glue gun and starter consumables
▸ Localised pulling method suitable for small dents
▸ 7 pulling tabs for different contact points
▸ Compatible with standard 7 mm hot glue sticks
Cons
▸ Results depend heavily on the type and position of the dent
▸ Not intended for professional or industrial use

Battery / consumables advice
This product does not run on a battery. For continued use, 7 mm hot glue sticks compatible with the supplied glue gun are required. It is advisable to use only suitable consumables with the correct dimensions.

Objective final opinion
The PARKSIDE® 21-Piece Dent Repair Kit offers a practical and structured solution for correcting small dents on vehicle bodywork. Its contents are well balanced for occasional use, including the main tool, starter consumables and pulling accessories. It remains a solution for limited repairs and requires careful use to achieve satisfactory results.

FAQ
Is it suitable for all bodywork dents?
No, it is mainly suitable for small dents in areas where controlled localised pulling can be applied. More serious damage usually requires a different repair method.
Is the hot glue gun included in the box?
Yes, the kit includes a hot glue gun and 10 glue sticks. This allows it to be used straight away for basic repair work.
Can other glue sticks be used?
Yes, provided they are compatible with a 7 mm diameter. Using the correct size is important for proper and safe operation.