PARKSIDE® Cordless soldering iron PLKA 4 C3, 4V

Technical overview

The PARKSIDE® Cordless soldering iron PLKA 4 C3, 4V is a compact tool intended for soldering electronic components indoors. Its integrated battery, short heat-up time and LED work light support small repairs without a mains lead attached during use.

Key features

▸ Integrated 4V, 1.5 Ah lithium-ion battery
▸ Reaches its 300 °C operating temperature in about 30 seconds
▸ LED work light with heating and charging status indicator
▸ Automatic switch-off after 10 minutes

How it works and what it is for

Holding the power button starts heating, and the indicator turns green when the tip reaches 300 °C. The tool is held like a pen to heat the joint briefly before solder is applied. It is intended only for electronic components in a dry, well-ventilated indoor area and must not be used to heat liquids or plastics.

Main technical specifications

▸ Rated voltage: 4V
▸ Power: 8W
▸ Maximum tip temperature: 470 °C
▸ Battery capacity: 1.5 Ah
▸ Charging time: 2–3 hours
▸ Weight: 111 g

Included accessories / compatibility

The set contains one soldering tip, 10 g of 1.0 mm solder, a station, a cleaning sponge and a USB-A to USB-C charging cable. A mains adaptor is not included. The threaded tip can be replaced once the tool is cool and disconnected.

Who it is recommended for

This model suits home users carrying out occasional repairs on small circuits, wires or electronic components. Its cordless format is useful at a workbench and in confined areas where a lead could interfere with precise movements.

Pros and cons

Pros
▸ Lightweight cordless format
▸ Reaches 300 °C in about 30 seconds
▸ Work light and clear readiness indicator
▸ Station, sponge, solder and charging cable included
Cons
▸ Mains charging adaptor not included
▸ Cannot be operated while charging

Battery / consumables advice

The battery in the PARKSIDE® PLKA 4 C3 is integrated and cannot be replaced by the user. Charge it with the supplied cable and a compatible recommended adaptor. Clean the tip on the damp sponge, tin it before use and select solder suitable for electronic components.

Objective final opinion

The PLKA 4 C3 is a manageable option for small electronic soldering tasks, combining rapid heating, low weight and useful accessories. Its main limitations are the inability to work while charging and the lack of a mains adaptor.

FAQ

How quickly does it reach operating temperature?
The tip reaches about 300 °C in 30 seconds and can reach a maximum temperature of 470 °C.
Can the iron be used while charging?
No. The tool cannot operate while it is connected for charging.
Is a mains charger supplied?
No. Only the USB-A to USB-C cable is included, so a suitable mains adaptor is required separately.
Can the soldering tip be replaced?
Yes. It unscrews for replacement after the tool has cooled and been disconnected.