PARKSIDE® Domestic Water Pump System PEHWW 1000 A1

Technical overview
The PARKSIDE® Domestic Water Pump System PEHWW 1000 A1 is a 1,000 W pressure-booster system for the automatic supply of clean, non-drinking water. Its 19-litre pressure tank, pressure switch and gauge provide a consistent supply from wells, storage tanks or rainwater butts.

Key features
▸ Automatic supply of clean water and rainwater
▸ Low-maintenance 1,000 W electric motor
▸ Automatic motor overload protection
▸ Approximately 19-litre pressure tank
▸ Pressure switch for automatic starting and stopping
▸ Pressure gauge with bar scale
▸ Maximum flow rate of 3,600 litres per hour
▸ Maximum delivery head of 40 metres
▸ Maximum suction height of 7 metres
▸ On/off switch with indicator light
▸ Stable base with mounting holes
▸ IPX4 splash-water protection

How it works and what it is for
The pump draws water through a suction pipe from a well, storage tank or rainwater butt and delivers it to the connected system. The pressure tank stores a supply of pressurised water, reducing frequent motor starts. The pressure switch automatically starts and stops the pump according to the system pressure. It is suitable for irrigation and domestic service-water systems, but not for drinking water.

Main technical specifications
▸ Model: PEHWW 1000 A1
▸ Technical designation: WWS-HSW1000-L01
▸ IAN: 517171_2510
▸ Rated power: 1,000 W
▸ Power supply: 220–240 V~, 50 Hz
▸ Maximum flow rate: 3,600 l/h
▸ Maximum delivery head: 40 m
▸ Maximum suction height: 7 m
▸ Maximum pressure: 4 bar
▸ Preset cut-off pressure: approximately 3 bar
▸ Tank capacity: approximately 19 litres
▸ Maximum water temperature: 35 °C
▸ Suction connection: G1 female thread, 30.3 mm
▸ Delivery connection: G1 female thread, 30.3 mm
▸ Mains cable length: approximately 1.5 m
▸ Protection rating: IPX4
▸ Dimensions: approximately 44.5 x 28 x 50.5 cm
▸ Weight: approximately 10.8 kg

Included accessories / compatibility
▸ 2 connection adaptors
▸ Suitable for pressure-resistant suction and delivery pipes
▸ Required connection pipes are not included
▸ Pre-filter is not included
▸ Floor-fixing materials are not included

Who it is recommended for
It is recommended for household installations using clean water from a well, storage tank or rainwater butt. It is suitable for irrigation and service-water networks that require automatic pressure control, provided the correct pipes and filtration are installed.

Pros and cons
Pros
▸ Maximum flow rate of 3,600 litres per hour
▸ 19-litre tank reduces repeated motor starts
▸ Automatic operation through the pressure switch
▸ Motor overload protection and IPX4 rating
Cons
▸ Pipes and pre-filter must be obtained separately
▸ Not suitable for pumping drinking water

Battery / consumables advice
Use pipes that resist pressure, vacuum and kinking. Fit a suitable pre-filter where the source water may contain particles, and seal threaded connections with PTFE tape or another approved sealing product. Check the pressure tank’s air pressure periodically.

Objective final opinion
The PARKSIDE® Domestic Water Pump System PEHWW 1000 A1 provides suitable performance for automatic irrigation and household service-water applications. Its 19-litre tank and pressure switch help maintain a consistent supply, although correct installation requires suitable pipes, secure sealing and potentially a pre-filter.

FAQ
Can this pump be used with rainwater?
Yes. It is suitable for clean water from rainwater butts, storage tanks and wells. A pre-filter is advisable where the water may contain debris.

Does the pump start automatically?
Yes. The pressure switch automatically starts and stops the pump according to the pressure within the connected system.

Can it pump drinking water?
No. It is designed for irrigation and service water and must not be used to supply drinking water.