PARKSIDE® Multi-Process Welder PMSG 200 A2, 4500 W

Technical overview
The PARKSIDE® Multi-Process Welder PMSG 200 A2, 4500 W is a compact welding unit designed for MIG, MAG, flux-cored wire, MMA and TIG welding. It can be used on steel, stainless steel, sheet metal, cast iron and aluminium with suitable consumables, combining manual adjustment, a digital display and automatic wire feed.

Key features
▸ Multi-process welder for MIG, MAG, flux-cored wire, MMA and TIG
▸ 4.5 kW input power
▸ Digital display for welding current and voltage
▸ Welding current adjustment by rotary control
▸ Welding process selection via dedicated button
▸ Integrated automatic wire feed in the side compartment
▸ Robust metal housing with carrying handle
▸ Compatible with wire reels up to approximately 5 kg

How it works and what it is for
The PARKSIDE® Multi-Process Welder PMSG 200 A2, 4500 W runs on 230 V mains power and allows the welding process to be selected according to the material, wire or electrode used. In MIG/MAG or flux-cored wire mode, the wire is fed automatically to the torch. In MMA mode, the unit uses coated electrodes. In TIG mode, a compatible TIG torch and suitable accessories are required.

Main technical specifications
▸ Model: PMSG 200 A2
▸ Input power: 4.5 kW
▸ Power supply: 230 V~ 50 Hz
▸ Required fuse: 16 A
▸ Stated weight: 7.7 kg
▸ Flux-cored wire welding: 50–160 A
▸ MMA welding: 30–140 A
▸ TIG welding: 30–200 A
▸ Open-circuit voltage for flux-cored wire / MMA: 56 V
▸ Open-circuit voltage for TIG: 52 V
▸ Compatible wire diameter: up to 1.0 mm
▸ Maximum wire reel: approximately 5,000 g
▸ Insulation class: H
▸ Protection rating: IP21S

Included accessories / compatibility
▸ 1 PMSG 200 A2 multi-process welder
▸ 1 pre-fitted 1.0 mm welding nozzle for solid aluminium wire
▸ 4 nozzles for steel / flux-cored wire: 0.6 mm, 0.8 mm, 0.9 mm and 1.0 mm
▸ 1 slag hammer with wire brush
▸ 1 reel of solid aluminium wire, 200 g, Ø 1.0 mm, type ER5356
▸ 1 welding face shield
▸ 1 MMA electrode holder
▸ 1 earth clamp with cable
▸ 1 MIG torch with welding cable
▸ 1 reel of steel flux-cored wire, 200 g, Ø 1.0 mm, type E71T-GS
▸ 5 electrodes: 2 x 1.6 mm, 2 x 2.0 mm, 1 x 2.5 mm
▸ Compatible with welding steel, stainless steel, sheet metal, cast iron and aluminium using suitable consumables
▸ A compatible TIG torch is required for TIG welding

Who it is recommended for
This welder is recommended for trained users looking for a versatile unit for occasional or regular workshop welding tasks. It is suitable for repairs, metal assembly and maintenance work on different materials, provided that suitable consumables and protective equipment are used.

Pros and cons
Pro
▸ Multiple welding processes in one unit
▸ Current range up to 200 A in TIG mode
▸ Basic accessories included for different types of work
▸ Digital display helps monitor settings
Cons
▸ Use requires welding knowledge and suitable protection
▸ Compatible TIG torch is not listed as included

Battery / consumables advice
Only use wires, nozzles and electrodes compatible with the selected welding process and the stated diameters. For solid aluminium wire, argon must be used as shielding gas. With self-shielded flux-cored wire, no additional gas is required. Welding nozzles should be replaced when worn or contaminated to maintain consistent wire feed.

Objective final opinion
The PARKSIDE® Multi-Process Welder PMSG 200 A2, 4500 W is a versatile and well-equipped unit for welding work on different materials. Its adjustment range, digital display and included accessories make it a complete solution for demanding non-professional use, provided safety instructions are followed and suitable consumables are used.

FAQ
Which welding processes does this welder support?
It supports MIG, MAG, flux-cored wire, MMA and TIG welding, with the appropriate accessories and consumables for each process.

Can it weld aluminium?
Yes, it can be used with suitable solid aluminium wire. Argon shielding gas is required for this type of wire.

Is the TIG torch included?
The TIG torch is not listed as included. A compatible torch is required for TIG welding.