PARKSIDE PERFORMANCE® Cordless work light PALA 4000 B1, 4000 lm, 40 W

Technical overview
The PARKSIDE PERFORMANCE® Cordless work light PALA 4000 B1, 4000 lm, 40 W is a portable COB LED light for areas without a convenient mains connection. Its integrated lithium-ion battery, folding magnetic stand and four operating modes support maintenance work in a garage, workshop, garden shed or around a vehicle.

Key features
▸ White light at maximum output or in a 50% energy-saving mode
▸ White SOS flashing and red flashing light for location marking
▸ Adjustable magnetic stand that also serves as a handle or hanging support
▸ Protected USB port, battery-level indicator and power-bank function

How it works and what it is for
Repeated presses of the power switch cycle through the available modes. The COB LED provides up to approximately 4000 lm for illuminating a work area, while the reduced-output mode extends runtime. The hinged support lets the light stand, attach to a suitable metal surface or hang. Its flashing modes are useful for visibility but are not approved as road-traffic warning lights.

Main technical specifications
▸ Power: approximately 40 W from 1 non-replaceable COB LED
▸ Maximum luminous flux: approximately 4000 lm; colour temperature: approximately 6500 K
▸ Integrated battery: 11.1 V, 4000 mAh, 44.4 Wh lithium-ion
▸ Runtime: approximately 2 hours at full output and 4 hours in energy-saving mode
▸ Flashing modes: approximately 8 hours for SOS and 60 hours for red flashing
▸ Charging time: approximately 7 hours with a 5 V/2 A USB supply
▸ Protection: IP65 with the protective cap closed; USB cable rated IP20
▸ Dimensions: approximately 185 × 185 × 50 mm; weight: approximately 980 g

Included accessories / compatibility
The package contains the work light, a USB cable and a short guide. Charging uses the USB-C input and a SELV supply rated at no more than 5 V/2 A. The battery is built in and is not user-replaceable. Charging and power-bank use are restricted to indoor locations.

Who it is recommended for
This light suits home users carrying out vehicle maintenance, DIY repairs or temporary work in a garage, workshop or outdoor area. It is intended for private domestic use. It is not designed for permanent household room lighting or continuous commercial operation.

Pros and cons
Pros
▸ Strong light output from a compact housing
▸ Four modes for working light and location marking
▸ Adjustable magnetic support with a hanging option
▸ Integrated battery with charge indicator and power-bank function
Cons
▸ Runtime at maximum brightness is approximately 2 hours
▸ The battery cannot be replaced by the user

Battery / consumables advice
Charge with a suitable USB supply rated at no more than 5 V/2 A and use the cable indoors only. Avoid storing the unit for long periods with a fully depleted battery. Before working in dusty conditions or near water spray, check that the USB protective cap is completely closed.

Objective final opinion
The PALA 4000 B1 combines high output, flexible positioning and practical flashing modes in a portable unit. Maximum mode is best suited to shorter demanding tasks, while the energy-saving setting is more useful for longer work. Its main limitations are the lengthy charge time and non-removable battery.

FAQ
How long does the PALA 4000 B1 run on one charge?
It runs for approximately 2 hours at maximum output and 4 hours in energy-saving mode. SOS lasts about 8 hours and red flashing about 60 hours.
Can the work light be used outdoors?
Yes. It is rated IP65 when the USB protective cap is properly closed. Charging and power-bank operation must take place indoors.
Can the integrated battery be replaced?
The 11.1 V, 4000 mAh battery is not user-replaceable. Any replacement must be carried out by a suitably qualified person.
Can it charge a phone or another small device?
It can operate as a power bank for small USB-charging electronics. This function is intended for indoor use only.