PARKSIDE PERFORMANCE® Rotary Hammer Drill PPBH 1050 A1, 4.1 J, 1,050 W

Technical overview
The PARKSIDE PERFORMANCE® Rotary Hammer Drill PPBH 1050 A1, 4.1 J, 1,050 W is a mains-powered tool designed for drilling concrete, masonry and stone, as well as light chiselling work. With a suitable drill bit, it can also drill wood, plastic and metal.

Key features
▸ Pneumatic impact mechanism delivering 4.1 J
▸ SDS-Plus tool holder for quick accessory changes
▸ Six-stage adjustment of speed and impact rate
▸ Drilling, hammer drilling and chiselling modes
▸ Adjustable chisel position
▸ Vibration-damping system in the handle
▸ Ergonomic main handle with non-slip Softgrip coating
▸ Auxiliary handle adjustable through 360°
▸ Safety clutch for a jammed drill bit
▸ Kickback Control system
▸ Protection against unintended restarting
▸ Metal depth stop and rigid carrying case

How it works and what it is for
The motor drives the SDS-Plus tool holder and, depending on the selected mode, combines rotation with pneumatic impact. Hammer drilling is intended for concrete, brick and stone, while chiselling mode supports light demolition, chasing and tile-removal work. Standard rotary drilling is suitable for wood, plastic and metal when the correct accessory is used.

Main technical specifications
▸ Model: PPBH 1050 A1
▸ Model number: HG13863
▸ IAN: 504703_2504
▸ Power supply: 230–240 V~, 50 Hz
▸ Rated power: 1,050 W
▸ Impact energy: 4.1 J
▸ No-load speed: 0–900 min⁻¹
▸ Impact rate: 0–4,300 min⁻¹
▸ Tool holder: SDS-Plus
▸ Maximum diameter in concrete or brick: 28 mm
▸ Maximum diameter in metal: 13 mm
▸ Maximum diameter in wood: 30 mm
▸ Cable length: approximately 5 m
▸ Dimensions: approximately 35 x 24 x 11 cm
▸ Weight: approximately 4.9 kg
▸ Protection class: II

Included accessories / compatibility
▸ 3 SDS-Plus concrete drill bits, 165 mm long, in 6, 8 and 10 mm diameters
▸ 1 auxiliary handle
▸ 1 metal depth stop
▸ 1 50 g tube of grease for the tool holder
▸ 1 cleaning cloth
▸ 1 key for the housing cover
▸ 1 carrying case
▸ Compatible with SDS-Plus drill bits and chisels
▸ Chisels are not included

Who it is recommended for
It is recommended for home renovation, installation and fixing work involving concrete, brick and stone. It also suits occasional light chiselling, tile removal and minor demolition tasks when used within the stated operating limits.

Pros and cons
Pros
▸ 4.1 J impact energy for demanding mineral materials
▸ Six-stage speed and impact-rate adjustment
▸ Protection against jamming, kickback and unintended restarting
▸ SDS-Plus drill bits and carrying case included
Cons
▸ The approximately 4.9 kg weight may affect comfort during prolonged work
▸ No chisels are supplied for the chiselling function

Battery / consumables advice
Apply a small amount of suitable grease to the shank of SDS-Plus accessories before fitting them. Select drill bits and chisels according to the material and do not exceed the stated maximum drilling diameters. Inspect the dust-protection cap regularly and replace worn or damaged accessories.

Objective final opinion
The PARKSIDE PERFORMANCE® Rotary Hammer Drill PPBH 1050 A1, 4.1 J, 1,050 W combines strong pneumatic impact, adjustable output and useful safety systems. It is suitable for demanding domestic work, although its weight and the absence of supplied chisels should be considered.

FAQ
Can it drill reinforced concrete?
It can drill concrete up to 28 mm with a suitable SDS-Plus bit. Contact with steel reinforcement may require a specialist accessory and an appropriate drilling method.

Which operating modes are available?
It provides rotary drilling, hammer drilling, chiselling and a separate setting for adjusting the chisel position.

Are chisels included?
No. Three SDS-Plus drill bits in 6, 8 and 10 mm sizes are supplied, but compatible chisels must be obtained separately.