PARKSIDE® PMK 550 C2 Metal Nibbler

Technical overview
The PARKSIDE® PMK 550 C2 Metal Nibbler is a corded power tool designed for precise cutting of steel and aluminium sheet metal. The PARKSIDE® PMK 550 C2 Metal Nibbler enables straight and curved cuts with controlled cutting width and limited material deformation.

Key features
▸ 550 W rated power
▸ Suitable for steel and aluminium sheet metal
▸ Straight and curved cuts possible
▸ Minimum internal cutting radius of 45 mm
▸ 5 mm cutting width
▸ Adjustable die holder
▸ Corded mains operation
▸ Adjustment accessories included

How it works and what it is for
The PARKSIDE® PMK 550 C2 Metal Nibbler works by nibbling: the punch progressively removes small sections of metal to create a clean cut. It is used for DIY, workshop and renovation tasks requiring accurate cutting of metal sheets.

Main technical specifications
▸ Brand: PARKSIDE®
▸ Model: PMK 550 C2
▸ Type: corded electric metal nibbler
▸ Rated voltage: 230 V~
▸ Frequency: 50 Hz
▸ Rated power: 550 W
▸ No-load stroke rate: 2,200 min⁻¹
▸ Aluminium cutting capacity: up to 2.5 mm
▸ Steel cutting capacity: up to 1.6 mm, depending on material strength
▸ Cutting radius: 45 mm internal, 50 mm external
▸ Cutting width: 5 mm
▸ Protection class: II

Included accessories / compatibility
▸ 1 metal nibbler
▸ 2 grooved pins, including 1 pre-fitted
▸ 2 hex keys
▸ Compatible with steel and aluminium sheet metal within the stated thickness limits

Who it is recommended for
The PARKSIDE® PMK 550 C2 Metal Nibbler is recommended for DIY users and workshop users who need to cut sheet metal accurately, especially for curved cuts, openings and clean cut-outs in metal panels.

Pros and cons
Pro
▸ Suitable power for sheet metal cutting
▸ Enables straight and curved cuts
▸ Good precision with 5 mm cutting width
▸ Adjustment accessories included
Cons
▸ Limited to compatible sheet thicknesses
▸ Produces metal chips during cutting

Battery / consumables advice
No battery is required, as the tool is mains powered. Regularly check the condition of the punch, die and pins, and lubricate the cutting area according to the material being worked.

Objective final opinion
The PARKSIDE® PMK 550 C2 Metal Nibbler is a specialised tool for cutting thin sheet metal with precision. Its power, cutting radius and included accessories make it suitable for accurate metalwork when the stated thickness limits are respected.

FAQ
What thickness of metal can it cut?
It can cut up to 2.5 mm aluminium and up to 1.6 mm steel, depending on material strength.

Can it make curved cuts?
Yes, it supports straight and curved cuts, with a minimum internal radius of 45 mm.

Does it work with a PARKSIDE® battery?
No, this is a corded mains-powered tool.