PARKSIDE® Pneumatic paint spray gun PDFP 500 D4

Technical overview
The PARKSIDE® Pneumatic paint spray gun PDFP 500 D4 is a compressed-air spray gun designed for applying paints, varnishes, wood stains, oils, primers and compatible liquid coating products. It works on the HVLP principle, using high air volume and low pressure to reduce spray mist and support an even application on suitable surfaces.

Key features
▸ Pneumatic paint spray gun for compressed air
▸ HVLP technology for fine and even spraying
▸ Maximum operating pressure of 3.5 bar
▸ 1.4 mm nozzle
▸ Approx. 500 ml gravity-feed cup
▸ Adjustable round, flat or wide spray pattern
▸ Adjustable air volume
▸ Adjustable sprayed material quantity

How it works and what it is for
The PARKSIDE® Pneumatic paint spray gun PDFP 500 D4 connects to a clean compressed-air source, free from condensate and oil, ideally with a filter pressure reducer. The material to be sprayed is poured into the gravity-feed cup, then controlled through the trigger and flow settings. It is intended for applying liquid coating products to wood, metal or properly prepared surfaces, but is not suitable for latex or dispersion paints, acidic, alkaline, granular or excessively thick products.

Main technical specifications
▸ Brand: PARKSIDE®
▸ Model: PDFP 500 D4
▸ Type: pneumatic paint spray gun
▸ Operating principle: HVLP
▸ Operating pressure: max. 3.5 bar
▸ Nozzle size: Ø 1.4 mm
▸ Gravity-feed cup capacity: approx. 500 ml
▸ Recommended viscosity: 18–23 DIN-sec
▸ Sound pressure level LpA: 73.1 dB(A)
▸ Sound power level LWA: 93.1 dB(A)
▸ Sound uncertainty: K = 2.5 dB
▸ Recommended compressor: tank from 24 l
▸ Year of manufacture: 08/2024

Included accessories / compatibility
▸ Pneumatic paint spray gun PDFP 500 D4
▸ Gravity-feed cup
▸ Lid for gravity-feed cup
▸ Cleaning brush
▸ Filter
▸ User manual
▸ Compatible with a suitable compressed-air source
▸ Filter pressure reducer recommended for pressure adjustment

Who it is recommended for
This spray gun is recommended for DIY users who want to apply even coats of paint, varnish, wood stain, primer, oil or compatible protective product on prepared surfaces. It is suitable for private use, including renovation, maintenance, finishing or protection tasks, provided a suitable compressor is available.

Pros and cons
Pro
▸ HVLP spraying with reduced spray mist
▸ Separate adjustment of spray pattern, air and material flow
▸ 500 ml gravity-feed cup suitable for small jobs
▸ Basic accessories included for use and cleaning
Cons
▸ Requires a compatible compressor
▸ Not suitable for thick, granular, acidic or alkaline products

Battery / consumables advice
Use only coating products with viscosity compatible with the recommended range. Thin the material according to the manufacturer’s instructions for the product used and filter it before filling if necessary. Clean the spray gun, nozzle, cup and filter thoroughly after each use to prevent blockages and maintain an even spray pattern.

Objective final opinion
The PARKSIDE® Pneumatic paint spray gun PDFP 500 D4 is a simple and functional tool for compressed-air painting and finishing work. Its 1.4 mm nozzle, 500 ml cup and spray adjustments allow controlled application on correctly prepared surfaces. However, it remains intended for private use and depends directly on the quality of the compressor, pressure setting and viscosity of the sprayed material.

FAQ
Does the PARKSIDE® PDFP 500 D4 work without a compressor?
No, it is a pneumatic spray gun. It requires a suitable compressed-air source to operate.

What pressure should be used with this paint spray gun?
The maximum operating pressure is 3.5 bar. This value must not be exceeded.

Which products can be sprayed with this model?
It can be used with water-thinnable paints, varnishes, wood stains, primers, oils and other compatible liquid products.