PARKSIDE® PPM 800 A1 Spot Repair Polisher, 800W

Technical overview
The PARKSIDE® PPM 800 A1 Spot Repair Polisher, 800W is a corded power tool designed for polishing paintwork, coatings, plastics and other smooth surfaces. Its compact 75mm backing pad, six speed settings and auxiliary handle make it suitable for precise work and targeted repairs.

Key features
▸ Six selectable speed settings
▸ Automatic power control under load
▸ Speed range from 1,300 to 3,900rpm
▸ Rubberised gearbox housing to help protect the work surface
▸ Non-slip main handle with Softgrip covering
▸ Auxiliary handle for controlled two-handed operation
▸ Hook-and-loop backing pad for quick polishing-pad changes
▸ Spindle lock for easier backing-pad replacement

How it works and what it is for
The motor rotates the backing pad fitted with the foam polishing pad. The speed can be adjusted according to the surface and polishing compound being used. The tool is intended for spot repairs, paint correction and polishing on vehicle paintwork, plastics, coatings and other compatible smooth surfaces.

Main technical specifications
▸ Model: PPM 800 A1
▸ IAN: 449752_2310
▸ Rated power: 800W
▸ Rated voltage: 230V~, 50Hz
▸ No-load speed: 1,300–3,900rpm
▸ Speed settings: 6
▸ Backing-pad diameter: 75mm
▸ Maximum polishing-pad diameter: 80mm
▸ Polishing-pad dimensions: 80 × 25mm
▸ Spindle thread: M14
▸ Mains cable length: approximately 4m
▸ Dimensions: approximately 290 × 115 × 75mm
▸ Weight: approximately 1.8kg
▸ Protection class: II, double insulated
▸ Sound pressure level: 87dB(A)
▸ Sound power level: 95dB(A)
▸ Acoustic uncertainty K: 3dB
▸ Hand-arm vibration: below 2.5m/s²
▸ Vibration uncertainty K: 1.5m/s²

Included accessories / compatibility
▸ 1 auxiliary handle
▸ 1 polishing backing pad, 75mm
▸ 1 foam polishing pad, 80 × 25mm
▸ 1 instruction manual
▸ M14 backing-pad connection
▸ Hook-and-loop polishing-pad attachment
▸ Suitable for compatible polishing pads with a maximum diameter of 80mm

Who it is recommended for
This polisher is recommended for home users carrying out spot repairs, paint correction and polishing on small areas of vehicle bodywork or other compatible smooth surfaces. It is not designed for sanding, wire brushing, drilling, grinding or cutting.

Pros and cons
Pros
▸ 800W motor with automatic power control under load
▸ Six speed settings for controlled polishing
▸ Compact pad size suitable for precise spot repairs
▸ Auxiliary handle and non-slip grip for improved control
Cons
▸ Small pad diameter makes large surfaces slower to complete
▸ The operating noise level requires suitable hearing protection

Battery / consumables advice
The tool is mains powered and does not require a battery. Use hook-and-loop polishing pads with a maximum diameter of 80mm and a polishing compound suitable for the surface being treated. Inspect the pad before each use and replace it if worn, distorted or damaged.

Objective final opinion
The PARKSIDE® PPM 800 A1 Spot Repair Polisher, 800W is primarily suited to precise polishing and targeted paintwork correction. Its adjustable speed, compact backing pad and auxiliary handle provide useful control, although the small working diameter is less efficient for polishing an entire vehicle quickly.

FAQ
Is this polisher suitable for car paintwork?
Yes. It is intended for polishing and spot repair work on vehicle paintwork, coatings, plastics and other compatible smooth surfaces.
Can the speed of the PARKSIDE® PPM 800 A1 be adjusted?
Yes. It has six settings covering a no-load speed range of approximately 1,300 to 3,900rpm.
Which polishing pads are compatible with this tool?
It uses hook-and-loop polishing pads with a maximum diameter of 80mm. The supplied backing pad has a diameter of 75mm.
Can it be used as a sander or angle grinder?
No. This model is designed exclusively for polishing and is not suitable for sanding, grinding, drilling or cutting.