PARKSIDE® PPS 40 B2 Plasma Cutter

Technical overview
The PARKSIDE® PPS 40 B2 Plasma Cutter is a corded machine designed for plasma cutting electrically conductive metals. It enables the cutting of steel, aluminium, copper, stainless steel and iron with an adjustable cutting current of up to 40 A.

Key features
▸ Adjustable cutting current from 15 A to 40 A
▸ Effective cutting capacity up to 12 mm depending on the material
▸ Suitable for electrically conductive metals
▸ Compressed air connection with Quick-Connect system
▸ Compact design for workshop and DIY use
▸ Operates from a 230 V mains supply

How it works and what it is for
The PARKSIDE® PPS 40 B2 Plasma Cutter uses an electric arc and compressed air to generate a plasma jet capable of separating metal. It is intended for cutting sheet metal, metal components and other conductive materials in a properly ventilated working environment.

Main technical specifications
▸ Brand: PARKSIDE®
▸ Model: PPS 40 B2
▸ Power supply: 230 V ~ 50 Hz
▸ Cutting current: 15–40 A
▸ Cutting capacity: 0.1–12 mm depending on material
▸ Steel: up to 12 mm
▸ Iron: up to 10 mm
▸ Aluminium: up to 8 mm
▸ Stainless steel: up to 8 mm
▸ Copper: up to 4 mm
▸ Duty cycle: 35% at 40 A and 25°C
▸ Duty cycle: 20% at 40 A and 40°C

Included accessories / compatibility
▸ Earth cable with clamp
▸ Plasma torch
▸ Compressed air hose with Quick-Connect fitting
▸ Electrodes
▸ Nozzles
▸ Torch sleeves
▸ Instruction manual
▸ Compatible with consumables designed for the PPS 40 B2 model

Who it is recommended for
This plasma cutter is recommended for experienced DIY users and workshop operators who need to cut a variety of conductive metals. It is suitable for maintenance work, light fabrication and sheet metal cutting where a suitable compressed air supply is available.

Pros and cons
Pro
▸ Adjustable current for different materials and thicknesses
▸ Good cutting capacity for a compact machine
▸ Suitable for several common metals
▸ Essential accessories included for operation
Cons
▸ Requires an external compressed air source
▸ Appropriate protective equipment is necessary

Battery / consumables advice
The PARKSIDE® PPS 40 B2 does not use a battery. The main consumables are the electrodes, nozzles and torch components. These should be replaced when wear affects arc stability or cutting quality.

Objective final opinion
The PARKSIDE® PPS 40 B2 Plasma Cutter is a practical workshop tool for metal cutting applications. Its adjustable 15–40 A output and ability to process different conductive metals make it versatile, while safe operation requires adequate ventilation and a suitable compressed air system.

FAQ
Can the PARKSIDE® PPS 40 B2 cut steel?
Yes, it can cut steel up to 12 mm thick depending on material condition, settings and consumable wear.

Does it require an air compressor?
Yes, the machine requires an external compressed air supply connected through the dedicated fitting.

Which metals can it cut?
It is designed for conductive metals including steel, stainless steel, aluminium, iron and copper.