PARKSIDE® Solar Irrigation Set PBSS1 A1

Technical overview
The PARKSIDE® Solar Irrigation Set PBSS1 A1 is a self-contained drip-watering system designed for up to 20 potted plants, balcony planters or small beds. Its control unit is powered by a monocrystalline solar panel and provides 14 preset watering profiles.

Key features
▸ Automatic watering for up to 20 plants
▸ 10.1-litre water container with lid
▸ 14 preset watering profiles
▸ Monocrystalline solar panel
▸ Three replaceable NiMH rechargeable batteries
▸ 20-metre hose that can be cut to suit the plant layout
▸ LED operating indicator on the control unit
▸ Ground installation or optional wall mounting
▸ IPX4 splash-water protection

How it works and what it is for
The control unit draws water from the container through the filter and delivers it to the inline drippers connected along the hose. The user selects a profile that determines the watering interval and operating time. The solar panel charges the batteries, helping the system continue working during periods of reduced sunlight.

Main technical specifications
▸ Model: PBSS1 A1
▸ Water container capacity: 10.1 litres
▸ Maximum number of plants: 20
▸ Watering profiles: 14
▸ Every 12 hours: 10, 15 or 20 minutes
▸ Every 24 hours: 5, 15, 20, 30 or 35 minutes
▸ Every 48 hours: 10, 20 or 30 minutes
▸ Every 72 hours: 10, 15 or 20 minutes
▸ Hose length: 20 metres
▸ Batteries: 3 rechargeable NiMH AA batteries, 1.2 V, 1,200 mAh
▸ Protection rating: IPX4
▸ Main material: plastic
▸ Solar panel: monocrystalline
▸ Container dimensions: approximately 30 x 19 x 28 cm
▸ Control unit dimensions: approximately 15.6 x 19.3 x 7 cm
▸ Weight including accessories: approximately 1.75 kg

Included accessories / compatibility
▸ 1 water container
▸ 1 control unit with solar panel
▸ 20 inline drippers
▸ 15 hose holders
▸ 8 T-connectors
▸ 8 end plugs
▸ 1 20-metre hose
▸ 1 filter
▸ 2 ground spikes
▸ 3 rechargeable NiMH AA batteries
▸ Operating instructions
▸ Compatibility with third-party irrigation systems is not specified

Who it is recommended for
This system is suitable for users who want to automate the watering of pots, balcony planters, greenhouse plants or small beds without a permanent mains-electricity or water connection. It is particularly useful where water must be supplied from a separate container.

Pros and cons
Pros
▸ Programmable watering for up to 20 plants
▸ Solar operation with rechargeable battery support
▸ Flexible installation using a cut-to-length hose
▸ Complete set with water container and fittings
Cons
▸ The container may require frequent refilling for water-intensive plants
▸ Watering is limited to preset profiles rather than fully custom programming

Battery / consumables advice
Position the solar panel where it receives sufficient daylight and check the batteries periodically. When replacement is required, use NiMH AA rechargeable batteries with matching specifications. Clean the filter and drippers regularly to reduce deposits and maintain a consistent water flow.

Objective final opinion
The PARKSIDE® Solar Irrigation Set PBSS1 A1 is a practical, adaptable solution for watering a limited number of plants independently. Its 14 profiles simplify scheduling, while the 20-metre hose accommodates different layouts. The effective autonomy depends on plant demand, weather conditions and the amount of water available in the container.

FAQ
How many plants can the system water?
It is designed to supply up to 20 plants using the 20 included inline drippers. Actual water distribution depends on the hose arrangement and the selected profile.

Does it work during cloudy weather?
Yes. The three NiMH rechargeable batteries store energy from the solar panel and support operation when sunlight is temporarily reduced.

Can the spacing between the drippers be changed?
Yes. The 20-metre hose can be cut into suitable sections, allowing each dripper to be positioned close to the relevant pot or plant.