SILVERCREST® Pool cleaning robot SCPR 50 A1

Technical overview
The SILVERCREST® Pool cleaning robot SCPR 50 A1 is a cordless pool robot designed for cleaning the floor of above-ground pools. It operates with an integrated lithium-ion battery, moves autonomously in the pool and vacuums dirt through its suction openings and lower tray with filter.

Key features
▸ Cordless operation with integrated lithium-ion battery
▸ Autonomous floor cleaning for above-ground pools
▸ Suitable for pool floors up to 50 m²
▸ Maximum immersion depth of 3 m
▸ Runtime of up to 60 minutes
▸ Charging time of up to 5 hours
▸ IPX8 protection for the pool robot
▸ Floating cord with ring for easier retrieval

How it works and what it is for
The SILVERCREST® Pool cleaning robot SCPR 50 A1 is charged using the supplied charger, then used directly in the water after the charging connection has been closed correctly. Once switched on and immersed, it moves across the pool floor to vacuum particles and deposits from the bottom. It is intended only for pool cleaning, with water between 4 °C and 35 °C, and must not be used when a person is in the water.

Main technical specifications
▸ Brand: SILVERCREST®
▸ Model: SCPR 50 A1
▸ Type: cordless pool cleaning robot
▸ Intended use: cleaning the floor of above-ground pools
▸ Battery: lithium-ion
▸ Battery capacity: 4000 mAh
▸ Battery voltage: 7.4 V
▸ Battery energy: 29.6 Wh
▸ Cell type: 4 lithium-ion 18650 cells
▸ Motor power: 26.64 W
▸ Maximum pool floor area: 50 m²
▸ Maximum immersion depth: 3 m
▸ Robot protection rating: IPX8
▸ Charging time: up to 5 h
▸ Runtime: up to 60 min
▸ Permitted water temperature: 4 °C to 35 °C
▸ Supplied charger: XVE024-0840150-4
▸ Charger output: 8.4 V / 1.5 A
▸ Charger output power: 12.6 W
▸ Charger protection class: II

Included accessories / compatibility
▸ Pool cleaning robot
▸ Charger
▸ Floating cord with ring
▸ Integrated filter
▸ User manual
▸ Compatible only with the supplied XVE024-0840150-4 charger
▸ Integrated battery not intended to be replaced by the user

Who it is recommended for
This robot is recommended for owners of above-ground pools who want to automate regular cleaning of the pool floor. It is suitable for small to medium-sized pools with a relatively clear floor and for users looking for a cordless appliance to collect dust, deposits and small debris from the bottom of the water.

Pros and cons
Pro
▸ Cordless operation practical around the pool
▸ Runtime of up to 60 minutes depending on use conditions
▸ Suitable for pool floors up to 50 m²
▸ Floating cord supplied for easier removal from the water
Cons
▸ Cleans only the pool floor, not the walls
▸ Charging time can reach up to 5 hours

Battery / consumables advice
Charge the robot only with the supplied charger and only when the appliance is switched off, dry and clean. The charger should be used in a dry, ventilated place protected from moisture. After each cycle, remove dirt from the filter and rinse accessible parts with clean water. Protect the appliance from frost and avoid prolonged dry operation.

Objective final opinion
The SILVERCREST® Pool cleaning robot SCPR 50 A1 is a practical solution for routine maintenance of above-ground pool floors. Its integrated battery, runtime of up to 60 minutes and compatibility with pool floor areas up to 50 m² make it useful for reducing manual cleaning. However, it is limited to floor cleaning and depends strongly on the pool shape, dirt level and surface condition.

FAQ
Does the SILVERCREST® Pool cleaning robot SCPR 50 A1 clean the walls?
No, this model is intended for cleaning the pool floor. It is not designed for cleaning walls or the waterline.

What pool area can it clean?
It is intended for a maximum pool floor area of up to 50 m², depending on dirt conditions and pool layout.

Is the charger included with the robot?
Yes, the compatible charger is included with the robot, along with a floating cord and retrieval ring.